Mud Dock’s workshop has a reputation in Bristol and beyond for quality bike servicing, custom tuning, custom building and professional bicycle repairs. We’re an authorised dealer and service centre for Trek, Cannondale, Brompton, Tern, Shimano and Chris King. So, if your bicycle needs some TLC, or a specific problem needs expert attention, you’ve come to the right place.

Bike servicing

A General Service keeps your bike running smoothly and maximises the life of your chain, cassette and chainrings. Frequent riders opt for this service every 6 months. A Full Service is a must if you’ve a high-end bike or ride most days. Serious cyclists usually book this every 12 months.

Please clean your bike and remove any large accessories (such as child seats) before dropping it off, or we may need to charge extra. Please also note that servicing costs do not include parts.

   

General Service £75

(£95 for cargo bikes)

Full Service £175

 

Full safety assessment of frame, components and wheels Everything in a General Service PLUS:
Both wheels trued All drivetrain components removed and deep cleaned
Full brake setup, and pads replaced if necessary Headset bearings serviced
Chain measured and replaced if necessary Hydraulic brakes bled, OR brake cables replaced if non-hydraulic
Full gear set up, and cables replaced if necessary  
Inspect and inflate suspension where necessary  
Check tyres and inflate to spec  
All bolts checked and torqued to specs  

Bike repairs, maintenance and upgrades

A range of typical workshop jobs are shown below, but we can take care of plenty of other tasks too. Our general workshop costs start at £75 per hour (plus the price of any parts). So, whatever you and your bike need, just call or email to discuss it and get an estimate.

Adjust brakes (cable) front or rear
Adjust brakes (disc) front or rear
Fit brake (cable)
Fit brake (hydraulic)
Fit brake pads (cable)
Fit brake pads (disc)
Service brake (cable)
Service/bleed brake (hydraulic)
Fit cable (regular)
Fit cable (internal)
Fit forks
Fit headset and headset bearings
Frame swap including solvent clean
Frame swap including solvent clean
Face headset, bottom bracket or disc mount (per item)
Re-align dropouts and hanger
Check frame alignment
Remove and re-fit rear shock
Remove and re-fit fork
Replace rear shock bushings
Service rear shock seals (air)
Service lower legs of fork
Fork oil-change service (includes seals and oil)
Adjust gears front and rear
Fit front or rear derailleur
Fit chain
Fit chainset
Fit cable (regular)
Fit cable (internal)
True wheel
Build wheel
Fit wheel front and rear
Service front hub
Service rear hub
Service rear hub (mulitspeed)
Fit tube
Fit tyre (tubeless)
Fit cassette/freewheel
Drive-chain solvent clean/service
Chainset, chain and cassette solvent clean
Front and rear mech solvent clean
Strip frame and solvent clean all parts
Pre-service cleaning (if required)
Fit grips/bar tape
Fit handlebars
Fit basic accessories (eg computer, lights or pedals)
Fit other accessories (eg rack or mudguards)
Puncture repair

Whatever your servicing or repair requirements, call, email or drop in to discuss your needs or book your bike into the workshop.